DESCRIPTION and FEATURESFCS II Channel Islands (CI) Performance Core (PC) Large ThrusterA collaboration with Channel Islands Surfboards, the CI Upright is designed for speed and tight turns. A template that comes to life in punchy hollow waves but can also suit conditions where you need the start up speed to get going.Type: Surfboard FinsFin FamilyReactor: Find speed. Speed, tight turns & snaps.Performance CorePerformance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.Carver: Find Power. Powerful, drawn-out turns with added hold.
DESCRIPTION and FEATURESAl Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.Type: Sufrboard Fins
DESCRIPTION and FEATURESMick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.Type: Sufrboard Fins
DESCRIPTION and FEATURESA collaboration with Channel Islands Surfboards, the CI Upright is designed for speed and tight turns.Type: Sufrboard Fins
The Al Merrick Twin +1 (AMT) generates maximum speed, drive and hold through big carves to perform around pointbreaks or lined up beach breaks. The AMT's honeycomb construction gives this fin a medium flex pattern, while the large area provides ample hold in overhead surf. The set is equipped with the option to ride with a small trailer fin for increased drive and stability, creating more of a thruster feel. Template Category | Pivot (tight-turns/loose) Construction | Honeycomb Size | Medium Twin +1
Overview Al Merrick's template is designed for radical, progressive surfing. The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns. Ideal Conditions Hollow steep waves, punchy beach breaks. Board Types Designed to fit the FCS II Fin System. Performance boards with deep concaves and moderate-to-extreme rocker. Fin Family Carver: Find Power. Powerful, drawn-out turns with added hold.
Overview Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer. Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip. Updated PC construction featuring ultralight AirCore. Ideal Conditions A wide range of conditions, particularly good in critical overhead waves. Board Types Designed to fit the FCS II Fin System. Recommended for performance shortboards with moderate-to-extreme rocker. Fin Family Accelerator: Find Control. Speed, flow and response with added control.
Overview All new construction has enabled us to produce the most responsive JS fin to date. AirCore reduces weight and creates more stiffness in the bottom 2/3 of the fin. The carbon tissue inlay helps distribute the flex where it’s needed most and provides quicker memory recall when executing a turn. The extra-long base produces lots of drive and speed. The tip is quite tapered and narrow which allows the fin to release out of the lip when pushed hard on more vertical angles of attack. “The best surfers in the world have used this fin to win multiple events, so we know it works.” - Jason Stevenson This fin is designed for intermediate and above surfers. On the open face it’ll feel secure when carving a longer turn, very smooth when transitioning between turns, with a nice offering of tail release when needed. This fin is all about flow! Board Types This fin can be used across most if the JS range as well as other performance and hybrid models. Performance boards with deep concaves and moderate-to-extreme rocker. Fin Family Carver: Find Power. Powerful, drawn-out turns with added hold.
Through the door style temporary roof racks, offered in two sizes. Durable cushioned pads that sit between the boards and the roof for added protection with connected Tie Downs. Industrial strength 30mm metal buckle with a moulded silicon cover for car protection. Heavy-duty 30mm military grade webbing. World's most advanced �through the door' DOUBLE soft rack system Aerodynamic and durable cushioned pads that sit between the boards and roof Industrial strength corrosion resistant metal cam buckle �Moulded silicon buckle cover for board and car protection Heavy-duty 30mm military grade, UV treated webbing Durable, UV treated material Reusable carry bag
Overview Designed by Rob in conjunction with his Firewire glazer model. High-performance keel fin. Low aspect ratio provides the fast and loose feel. Side fin more upright for speed. Centre fin more sweep for control. Board Types Designed to fit the FCS II Fin System. Recommended for all board types including fish, funboard, hybrid and keel fin boards.
Overview Designed in Hawaii by Glenn Pang and inspired by "The Saint", a board model he created in the 80's and made famous by Pottz, this is a versatile twin fin that can either be surfed as a twin fin or 2+1 set-up. Board Types Designed to fit the FCS II Fin System. Recommended for twin specific and hybrid surfboard models.
Britt Merrick’s new hand foiled signature twin fin set (BMT), is designed to fit between a traditional upright and keel fin. While conceived to maximize the performance and flow of the new CI Twin Pin, the setup works great in any twin fin board when you are looking for the perfect combination of drive, hold, and release. Construction | Fiberglass Side Fin Area 23.58 Height 5.39 Base 5.77 Foil FLAT
DESCRIPTION and FEATURESTreat your board right. From routine storage to everyday transport, our Daylight Surfboard Bag offers unbeatable lightweight, padded coverage. It is designed to fit longboards ranging from 7'6" to 10'2". Once tucked inside, your board enjoys heat- and water-resistant coverage plus full-length 1/4-inch (6.5mm) foam-padded ding protection. A padded shoulder strap leaves your hands free for other gear.Type: Longboard Cover Upgraded heat and water resistant tarpaulin material 1/4" [ 6.5mm ] Foam padding Heavy duty, YKK® coil zipper Zippered fin slot Non slip padded shoulder strap with stash pocket Wax/fin pocket9'2" x 26" [ 2.83m x 66.0cm ] 4.75 LBS [2.15 KG]
DESCRIPTION and FEATURESMatt 'Mayhem' Biolos's signature template delivers a lively combination of drive, hold and manoeuvrability. This versatile fin will feel reliable out on the open face or tight in the pocket.Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon thats designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.Type: FCS II Fin SystemDesigned to fit the FCS II Fin System.A wide range of conditions, particularly good in critical overhead waves.Designed to fit the FCS II Fin System.Performance shortboards and hybrid models.Reactor: Find Speed. Speed, tight turns & snaps.X-SMALL (Under 55Kg / 120 Lbs)SMALL (55Kg - 70Kg / 120 - 155 Lbs)MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)LARGE (75Kg - 90Kg / 165 - 200 Lbs)X-LARGE (Over 85Kg / 190 Lbs)
DESCRIPTION and FEATURESThe Machado Pivot, designed by style guru Rob Machado, is a large sized thruster in the Pivot template category. This set is designed around the idea of a thruster incorporating the drive and response of a twin keel. The combination of the extended base and reduced rake of the template pair perfectly with Futures' V2 foil to create a very lively feel, ideal for high performance in the pocket surfing. This fin was design in conjunction with the Machado Glazer model. Type: Surfboard FinsTemplate Category | Pivot (Tight-turns | Loose)Construction | BlackstixRide Number | Speed Generating - 7.0Size | Large (but do due to the Pivot/Keel template, suitable for any size)
DESCRIPTION and FEATURESTreat your board right. From routine storage to everyday transport, our Daylight Surfboard Bag offers unbeatable lightweight, padded coverage. It is designed to fit longboards ranging from 7'6" to 10'2". Once tucked inside, your board enjoys heat- and water-resistant coverage plus full-length 1/4-inch (6.5mm) foam-padded ding protection. A padded shoulder strap leaves your hands free for other gear.Type: Surfboard Covers 7'6" x 25.5" [ 2.33m x 64.75cm ] 3.9 lbs [1.77 kg] 8'0" x 26" [ 2.44m x 66.0cm ] 4.15 lbs [1.88 kg] 8'6" x 26" [ 2.62m x 66.0cm ] 4.4 lbs [2 kg] 9'2" x 26" [ 2.83m x 66.0cm ] 4.75 lbs [2.15 kg] 9'6" x 26" [ 2.93m x 66.0cm ] 4.90 lbs [2.22 kg] 10'2" x 27" [ 3.14m x 68.6cm ] 5.25 lbs [2.38 kg] 11'0" x 27.5" [ 3.14m x 69.85cm ] 5.7 lbs [2.59 kg] 31% Polyethylene, 28% Polyester, 18% Nylon, 13% Polyurethane, 10% Spandex Upgraded heat and water resistant tarpaulin material. 1/4" [ 6.5MM ] Foam padding Heavy duty, YKK® coil zipper Zippered fin slot Non slip padded shoulder strap with stash pocket Wax / fin pocket
Reliance Day Use Boardcovers are designed for day- to-day usage with generous single board capacity for a variety of shapes. Our Reliance Boardcovers use durable materials and rock solid construction to ensure your boards get to the beach and back intact. FEATURES: Polyester 400D Fabric - PU2 lamination DIAMOND-TECH Fabric - Tail Panel FOAM Protection - 5mm closed cell Expandable Fin Gusset - FOAM 5mm closed cell Marine-Grade corrosion resistant zips FOAM Padded handle - for carrying comfort Stash Shoulder strap
Suitable for minimals, performance longboards and the traditional longboard/malibu shapes Quick and easy, designed for everyday use. Convenient external & internal storage pouch. Padded shoulder strap for comfort. Carrier handles for ease of transport. Highest grade materials used to protect your boards. High quality zippers designed to withstand corrosion. Screen printed logos.
DESCRIPTION and FEATURESUltralight and tough; this is the ideal cover for day-to-day use as you transit to and from the beach.Type: Board Cover Wider Fit: designed for fish and funboard shapes. Lightweight: lightweight material ?to minimise boardbag weight. 30% lighter than previous model. 5mm High Density Padding: perfect protection for day-to-day use. Contoured Stretch Fit: uses a unique armadillo strip that not only provides ventilation, but keeps the bag snug and secure around your board. 3D Rail Protection: eliminates seams and provides a continuous layer of high density foam that contours to the shape of the rail. Expandable Fin Wing: allows for you to carry your board with or without fins. Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support. Noncorrosive Zippers: built for strength, durability and resistance to seizing.
Lighter materials and style for versatile wetsuits. Our Meta range combines lighter materials and style for versatile wetsuits. Meta wetsuits are made with the latest Eicoprene technology, a non-petroleum based synthetic foam derived from a mix of oyster shell powder, limestone, and recycled tires. To laminate the recycled polyester lining we use Aqua-A™, a solvent-free water-based glue with no harmful chemicals. The Meta LS 2/2 zip-free long-sleeve version is designed for spring and summer sessions. The flatlock seams increase flexibility and freedom of movement. Its fuse cut and drain holes minimize water entry and maximize water draining. The Meta 2/2 also features our Thermal Standard lining to insulate and retain body heat. Enjoy this minimalist style for one great session after another! Composition: Picture Eicoprene - 74% Eicoprene 15% Recycled Polyester 9% Recycled Nylon 2% Spandex Critically-taped seams 2/2 shorty with long sleeves Front-zip entry Flatlock seams Glideskin leg Fuse cut finish
Overview Ultralight and tough; this is the ideal cover for day-to-day use as you transit to and from the beach. Features Wider Fit: designed for fish and funboard shapes. Lightweight: lightweight material to minimise boardbag weight. 30% lighter than previous model. 5mm High Density Padding: perfect protection for day-to-day use. Contoured Stretch Fit: uses a unique ‘armadillo’ strip that not only provides ventilation, but keeps the bag snug and secure around your board. 3D Rail Protection: eliminates seams and provides a continuous layer of high density foam that contours to the shape of the rail. Expandable Fin Wing: allows for you to carry your board with or without fins. Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support. Noncorrosive Zippers: built for strength, durability and resistance to seizing.
Thanks to decades' worth of knowledge, as well as countless rounds of R&D, Devon and True Ames founder Chuck Ames landed on this beautiful, tidy, well-balanced outline with full base and moderate rake that was hand foiled for medium flex—making for a very responsive ride with just the right amount of hold and lift that helps you accelerate through turns. Shaped from clear fiberglass panels, the CI Mid’s 6.5” center box fin is available with either 4” FCS two-tab side bites for medium to bigger sized surfers, or 3.6” for lighter weight riders around 160lbs and under.
Lighter materials and style for versatile wetsuits. Our Meta range combines lighter materials and style for versatile wetsuits. Meta wetsuits are made with the latest Eicoprene technology, a non-petroleum based synthetic foam derived from a mix of oyster shell powder, limestone, and recycled tires. To laminate the recycled polyester lining we use Aqua-A™, a solvent-free water-based glue with no harmful chemicals. The Meta LL 2/2 zip-free full-length version is designed for spring and summer sessions. Our Flexskin technology provides incredible stretch and comfort for riding big waves in any conditions. The flatlock seams increase flexibility and freedom of movement. Its fuse cut and drain holes minimize water entry and maximize water draining. The Meta 2/2 also features our Thermal Standard lining to insulate and retain body heat. Enjoy the minimalist style for one great session after another! Composition: Flex Skin ultra strech Picture Eicoprene - 74% Eicoprene 13% Recycled Polyester 6,5% Recycled Nylon 4,5% Nylon 2% Spandex Critically-taped seams 2/2 full-length wetsuit with short sleeves Flex Skin ultra stretch neoprene No zippers Flatlock seams Fuse cut finish Glideskin neckline Glideskin sleeves Drain holes Knee pads Key pocket Weight: 700 g
Showing: 393-420 of 543 Item(s)
